Big sales for High Performance Carbon Fiber Plank_Big Sales_HangFung technology co.,LTD
HangFung technology co.,LTD
Big sales for High Performance Carbon Fiber Plank

Our very thinnest carbon fiber veneer.

A very flexible carbon fiber sheet, commonly used as a thin veneer over other substrates such as aluminum or MDF. It can be wrapped around a 1-inch diameter pipe and can be cut with a pair of scissors or razor knife. This carbon fiber veneer is the ideal choice for adhering to a smooth, flat surface to obtain the amazing depth and beauty of real carbon fiber at low cost.




0.5mm (.020") Glossy one side

Our standard thin carbon fiber veneer/sheet.

A fairly flexible carbon fiber veneer, it will wrap around a 4 inch diameter pipe. This sheet can be cut with a pair of good scissors or sharp razor knife. Most commonly used for projects requiring a decorative lamination over another stiff panel or substrate. The added thickness and rigidity covers slight imperfections in a substrate that might show through if covered by a .25mm sheet.




1.0mm (.038") Glossy one side

Medium carbon fiber sheet.

flexible, but usually used in flat form. This carbon fiber panel can be bent around a 10 to 12 inch diameter pipe and works well as a semi-rigid veneer, or a light structural material. Beautiful mirror gloss on one side, and a textured bonding surface on the reverse. This panel can be cut with multiple scoring actions with a razor knife or an abrasive cutoff wheel. Clean up the edges with 220 grit sandpaper for a soft, smooth feel.




1.3mm (.052") Glossy one side

Stiff carbon fiber sheet

With only slight flexibility, this carbon fiber panel will wrap around a 24¡± pipe. It is commonly used in light structural parts or dash panels to support gauges and controls. This sheet is our thickest carbon fiber with a gloss finish. It can be cut with a carbide router/cnc bits or abrasive cutoff wheels. As with all carbon fiber products, continuous rim, non-toothed blades work best.




1.7mm (.068") Matte texture on BOTH sides

Structural Panel - very Stiff carbon fiber sheet

This carbon fiber panel is semi-rigid with just a little flex and usually doesn't need a backing to support gauges and controls mounted to it. It can be cut with a carbide bits or abrasive cutoff wheels. Standard dremel tools can be used to cut features but plain steel tools will wear down after a few panels are cut. Many diamond coated cutting tools (can be used for all panel sizes) are available at hardware stores for low cost.




2.4mm (.093") Matte texture on BOTH sides

Structural Panel - rigid carbon fiber plate

Very rigid, this carbon fiber panel is built for light structural components and is ideal for RC car chassis, quad-copters, robotics, etc. It doesn't need a backing to support gauges and controls mounted to it. It can be cut with a carbide saw or abrasive cutoff wheels. Standard dremel tools can be used to cut features but plain steel tools will wear down after a few panels are cut. Diamond coated cutting tools are also a good choice.




3.1mm (.122") Matte texture on BOTH sides

1/8" thick Structural Panel - rigid carbon fiber plate

Very rigid, this carbon fiber panel is rock solid and most often used for structural parts and components, as well as knife handles (scales), and an endless variety of applications requiring great strength and light weight. It can be cut with a carbide saw or abrasive cutoff wheels. Standard dremel tools can be used to cut features but you should only use carbide or diamond coated tools. Many diamond coated cutting tools (can be used for all panel sizes) are available at hardware stores.




Custom thicknesses and dimensions are also available. We will manufacture any thickness up to .5¡±. Our 2x2 twill is available in 19 standard product dimensions from 4¡±x4¡± to 50¡±x100¡±. However, if you need another dimension, just ask -- other sizes can be cut for a small cut charge.

All Right Reserved. Copyright @2002-2017 HangFung technology co.,LTD
Tel:86-755-29624293 / 86-177-27403697 Fax: 86-755-61658538 Email£ºdennis@china-carbonfiber.com
Address:R2306,Hong Hai Gebu Comercial Building, Song Ming Road,Song Gang Town,Bao'an, Shen Zhen,518105,CHINA   Support By£º166800